Energy Series
These high quality
*Calculated door section R-value is in accordance with DASMA TDS-163
*Tested door U-factor is in accordance with DASMA 105.
Glass Panel Options
 24" X 8" (3150, 3200, 3220)
|
 24" X 12" (3150, 3200, 3220)
|
 Full-View* (3150, 3200, 3220)
|
 19-1/2" x 12" (3154, 3155, 3211, 3213)
|
*Aluminum Intellicore polyurethane full-view section available
Note: Windows available in insulated or insulated tempered glass.
Glazing Material Options
*Mirrored and laminate not available in 1/2"
Glass thickness available in 1/8", 1/4" and 1/2". Tri-wall polycarbonate thickness available in 1/2". Low-E available on insulated glass.
Color Options
*Available on select models.
Performance Options Available
25,000, 50,000 or 100,000 cycle springs available.
Factory Installed Top Seal
Tek screws are used every 6” and at the ends of the sections to attach the top seal at the factory.
| Models | BIM | Shop Drawing | Specification | Literature (PDF) | Instruction Manual (PDF) | Warranty |
|---|---|---|---|---|---|---|
| Model 3200 | ||||||
| Model 3220 | ||||||
| Model 3150 | ||||||
| Model 3154 | ||||||
| Model 3213 | ||||||
Commercial Hardware
Commercial doors are designed with hardware to meet demanding
applications of commercial building usage. All commercial doors are
provided with the following hardware as standard. For additional
upgraded hardware see “Options” tab.
- 14 gauge hinges
- Commercial 10 ball steel rollers with options for nylon tire rollers
- 10,000 cycle torsion springs
- Steel step plate and lift handle for easy operation
- Inside slide lock for increase security
- 19 gauge steel hinge support plates
- 18-gauge single end stiles; 16-gauge double end stiles
- Galvanized aircraft cables with 7:1 safety factory
- 2” or 3” track in a variety of configurations to meet building design requirements
Commercial Track Options
In commercial settings, space utilization and space constraints are
important factors in choosing the correct hardware configuration for
your application. Clopay track offerings and options enable you to make
the most efficient use of available space. Options include standard
lift, low head room front or rear mount, follow the roof pitch, full
vertical or combination of these options.
Commercial Torsion Springs
Designed to counterbalance even the largest doors, commercial torsion
spring assemblies can be designed for Industry standard 10,000 cycles or
can be upgraded to 25,000, 50,000 or 100,000 expected life cycles.